SMS or phone calls. At any ti me you can check the status of the system and if you want, whenever someone acces- ses the monitored area disarming the UNOTEC SAS Keychain RFID you will be noti fi ed through an SMS containing informati on on who and when agreed the monitored area.
4-butt on remote controls and 6 functi ons with built-in Wireless magneti c sensors for doors and windows, batt ery. with batt ery and LED status. PIR wireless moti on sensor batt ery status LED for in- terior OPTIONAL ITEMS PIR wireless moti on sensors with batt eries and out- Intelligent wireless adapter included with sirens, stro- door LED status and immune to movements of pets.
Page 4
Adjustable Wireless smoke sensor with built-in siren, Wireless sensor batt eries included fl ooding and status batt ery status LED. LEDs. Adjustable sound sensor Wireless Glassbreak with Wireless vibrati on sensors with batt ery, status LED status LED, including feeder and wired outputs. and adjustable sensiti vity.
Page 5
ANTI THEFT - FEEL SAFE: Besides being a clear deterrent, the main feature of System Security Alarm UNOTEC SAS is that warns you, to you even if you are kilometers away and their neighbors, where there has been a port in the area patrolled unauthorized.
Page 6
CONFIGURABLE DELAY TIME WINDOW Finally, there are two types of confi gurable delays in its Security Alarm System that will enable SAS UNO- TEC establish a window of ti me between when a sensor is acti vated unti l the Central acti vates the sirens and alerts the protocol begins.
Page 7
With this programming zones (sensors) is achieved when the house is empty and UNOTEC SAS in armed state all sensors are acti vated and protecti ng your home is high, but when they are at home (eg at night ) can set the status of your alarm system Safety Arming, allowing them to move freely inside the house without triggering any sensor, but also be protected against intrusions from the outside, since these sensors yes will be alert.
Page 8
Immediately aft er disarmament, the Central Control Panel will send an SMS to the phone number we have told you. In this SMS the recipient will fi nd informati on about the user who disarmed the UNOTEC SAS and the ti me that has made this disarmament.
Page 9
Partial Armed To set the Security Alarm System SAS UNOTEC state Parti al Armed press This way you can move freely inside your home without triggering any sensor, while maintaining a high degree of protecti on against intrusions.
Page 10
Sync butt on When adding a new item to its Security Alarm System UNOTEC SAS, it must be synchronized with the system to work together. To perform this synchronizati on is necessary to dial an access code (default 1234) for its Central Control Panel and...
These two lithium batt eries 800mAh 3.7V and each are essenti al because they allow us to keep the Security Alert System SAS UNOTEC acti ve even when it fails (or someone intenti onally cut) power supply. These batt eries are prepared to keep acti ve, without external power, our UNOTEC SAS up for 5h.
The sensor (s) wiring that connects to the input labeled as Z2, work in Normal mode. Activation output of electronic devices This output will provide a great versati lity to your UNOTEC SAS. With it, you can connect any device powered by relay acti vati on.
If you have a smart phone or Smartphone without doubt the best is to use the manufacturer’s applicati on for con- fi guring and managing your Security Alarm System UNOTEC SAS. In additi on to using this applicati on will reduce by half the number of SMS required to perform any confi...
Page 14
You can now control your UNOTEC SAS from the applicati on, here you can enter data from the Central Control Panel UNOTEC SAS. Set a name that helps you identi fy the UNOTEC SAS to be controlled and enter the phone number associated with the SIM card which is inserted into the CCP.
Page 15
Clicking on Clear will unlink RFID, upon confi rmati on, all set the phone to reach the informati on when and who keychains proximity to disarm the UNOTEC SAS. disarmed the system with a proximity key. * Note: It has to do when a proximity key is lost.
Page 16
As can be seen, the confi gurati on of Security Alarm System UNOTEC SAS through this applicati on is very easy and comfortable at the same ti me reduces the number of SMS required to perform it.
Page 17
Remember before starti ng the CCP PIN must be removed if possible detours off to the SIM card to be used in its UNOTEC SAS. Once this is done we can introduce into the slot for the SIM card which is in the inside of the CCP.
Page 18
People with this permission will have full control over the system may or may not have an RC-80 but his mobile phone number is stored at the CCP so they can remotely control the SAS UNOTEC at will. Send SMS to CCP...
Page 19
The most common confi guration parameters Once at this point, we can only defi ne a few more parameters for our Security Alarm System UNOTEC SAS is ope- rati onal. Setting the volume and length of the Changing the password (disarmament)
Page 20
Confi guring the activation delay for specifi c sensors Unlike the previous delay for input and output aff ects all sensors programmed in Normal, House and ti med, this delay aff ects only those who have programmed in Timed Mode. Its functi on is to allow more reacti on ti me (up to fi...
If you missed a Proximity Key Tag RFID is convenient to unlink your Security Alarm System for UNOTEC SAS it With this command all wireless accessories at once, in- can no longer be used by someone with bad intenti ons.
Page 22
SMS Management System Our Security Alarm System UNOTEC SAS can be controlled remotely via SMS. This provides great fl exibility allowing for example to disarm the system remotely if your child has forgott en the Key even if you are traveling in another country, enabling him to her daughter into the house without triggering an alarm.
Page 23
If this is the case you can not disarm your Security Alarm If you do not want to spend money to send a free SMS System SAS UNOTEC by any of the normal channels, can disarm the system remotely via a phone call. This is you can always disarm remotely.
Page 24
Programming Security Alarm System UNOTEC SAS is to be performed by means of SMS messages. Aware that the codes established to carry out this programming can easily forget the UNOTEC SAS has a help to remind those codes. In this way it becomes possible to confi gure the system even if the manual is lost and there is no access to the applicati on for Smartphone.
Page 25
COMPATIBILITY WITH IP CAMERAS The Security Alarm System UNOTEC SAS supports IP cameras have alarm input Physical cable connection As we saw above, in the inside of the CCP we have four shots with diff erent functi ons for wired devices: Z1, Z2, Push and Spk.
Page 26
To achieve this we use the wired zone “SPK / GND”, located on the inside of the CCP, connecti ng it either IP came- ras that have alarm inputs as discussed in secti on 1.6. This will get you to trigger an alarm in our UNOTEC SAS also the camera alert is triggered.
This informati on identi fi es unmistakably the key and being recognized by the CCP, it will give access to the area patrolled by disarming the UNOTEC SAS. These key chains are very safe because, unlike traditi onal braces, can not be copied.
Page 29
Pressing Pressing the Security Alarm System is set SAS UNOTEC state Arming. the CCP issued a soft beep if you receive the Security Alarm System is set SAS UNOTEC state Arming. the CCP issued a soft beep if you receive the same order that emitt ed if the same patt ern was pressed into his touch keyboard.
Page 30
Pressing Pressing jump immediately alarms our UNOTEC SAS regardless of the state in which it is located. At the same jump immediately alarms our UNOTEC SAS regardless of the state in which it is located. At the same ti me, the CCP sent SMS with the message and call emergency telephone numbers provided.
Page 31
SENSOR INSTALLATION DWC-100 The most important is to have a clear and eff ecti ve plan with the locati on of all elements of our UNOTEC SAS. Once the plane is defi ned it will proceed as follows: •...
Page 32
SYNC Enter the password (default 1234) on the CCP touch screen and press Enter the password (default 1234) on the CCP touch screen and press Enter the password (default 1234) on the CCP touch screen and press . As long .
Page 33
Normal Home Temporized within our house at night when our UNOTEC SAS is in a state of Arming. within our house at night when our UNOTEC SAS is in a state of Arming. INSTALLING THE PIR-900 Before fi xing the actual movement detector into its fi nal locati on must meet certain concepts.
Page 34
• Commissioning Once we proceed clear locati on as follows: We removed the front cover or the RIP. We place bridges or according to the desired setti ng. If you remove the batt eries may operate more comfortably. or post the bracket to the wall. We removed the strip or acti vati on of the batt ery.
Page 35
Terms 1. This warranty is valid for the purchase of products UNOTEC from the purchase date if the Warranty Certifi cate is present- ed with the original invoice or cash receipt given to the consumer by trade, and if the certifi cate warranty completed at the time of sale specifi...
Page 36
IMPORTED BY Tec1 Electronics Group SA C / Isabel Colbrand 10. Offi ce 160 | 28050 Madrid | CIF: A19273234 UNOTEC and TEC1 are registered trademarks by TEC1 ELECTRONICS GROUP, SA...
Need help?
Do you have a question about the SAS and is the answer not in the manual?
Questions and answers