Aux Mode - Peaq PDR200 User Manual

SCAN SETTING
1. Press MENU and Scan Setting will be
displayed.
2. Press SELECT knob to confirm the
selection.
AUDIO SETTING
Selecting Mono or Stereo mode.
1. Press MENU.
2. Select the Audio Setting
PDR200_A5_131219_1.indb 47

AUX Mode

1. Connect the audio cable (not included)
into the AUX IN jack (3.5 mm) at the rear
side of the device.
2. Press MODE to select AUX as a source.
3. Start playing from the device.
Attention
Check the safety and user instruction of the
external device before connection.
ENGLISH
47
19/12/13 10:39 AM