JDTECK wcb series User Manual

Abbreviations

........................................................................................

Safety

.....................................................................................................
1. Introduction ......................................................................................
2. Features & Functions
....................................................................
3. Installation Procedure
....................................................................
4. LED Operation Status ....................................................................
5. Trouble Shooting
.............................................................................
Specifications
.......................................................................................
Fcc Statement ..................................................................................
Terminology
2 Meaning
AGC Automatic Gain Control
2
BTS Base Transmitting Station (Cell Tower)
CDMA Code Division Multiple Access
Decibel – (A unit of measure for signal strength)
dB
3
DL Downlink (Communication channel from cell tower to mobile device)
Donor Outdoor Antenna (Antenna that donates an input signal)
4
GSM Global System for Mobile Communications
iDEN Integrated Digital Enhanced Network
LCD Liquid Crystal Display
6
LED Light Emitting Diode
LTE Long Term Evolution
MS Mobile Station
7
PCS Personal Communication System
RF Radio Frequency
UL Uplink (Communication channel from mobile device to cell tower)
8
9
User Warnings – MUST READ!
10
1. This amplifier must ONLY be used for the purpose it was
intended for. Making any alternations to the design layout
without first consulting with a trained technician can result in
interference to the operator's network and liability by the end
user.
2. Please read this entire manual carefully before using this product!
3. Only the power supply that came with the amplifier should be
used at all times. It is highly recommended that the repeater
is grounded and lightning protection used.
4. Do not attempt to open any part of the amplifier. This will void
the warranty and can cause an electric shock. Electrostatic
can also cause damage to the internal components.
5. Please keep away from any heating-equipment, because the
amplifier will dissipate heat when working. Do not cover the
amplifier with anything that influences heat-dissipation.
6. Do not place or mount the amplifier in a location that is exposed
to the elements. This will void the warranty and can cause an
electric shock.