Installation - Unpacking And Connection - B&W electronics dm70 Instruction Manual

Installation -
unpacking and connection
For safety in transport t h e D M 7 0 Improved system is packaged in
three cartons, f o r each loudspeaker:—
Carton 1 Main cabinet with fitted power supply unit.
Carton 2 T w o metal stands for the pair of loudspeakers.
Carton 3 The " 7 0 2 " electrostatic unit complete.
WARNING
IT IS ESSENTIAL THAT THE ASSEMBLY A N D INSTALLATION
INSTRUCTIONS BE CAREFULLY READ BEFORE CONNECTING
THIS SYSTEM TO THE MAINS OR AUDIO SUPPLY.
Unpacking. Unpack the largest cartons and remove the accessory
bag tied to the rear of the power pack at the back of each cabinet.
This bag contains all necessary hardware and spares, such as fuses.
The smaller packages should then be unpacked. It is a worthwhile pre-
caution to save the polystyrene pieces in which the electrostatic units
are packed in case of any future transportation.
The stands may n o w be fitted to the base of the cabinets by means
of the metal bolts provided which will mate w i t h sealed captive nuts
inside the base of the cabinet.
Mains. Before attempting to connect the mains supply to your DM70
check that your supply voltage agrees with the adjustment made to
the system before it left our factory.