Universal Timer Cyber ExerCycl User Manual page 10

After mounting all the components and connecting the controller to the PC, run the
setup utility and configure Cycber ExerCycle to Joystick Mode, 40rpm setting.
Verify the operation of Cyber ExerCycle:
Pressing "Z" button on the joystick should make the LED on the controller turn
•
solid green. (CEC_KIT_PC only)
Moving the magnet close to the sensor forces the status LED to turn sold green.
•
As you move the magnet away, the status LED should start blinking again.
Open Game Controller Properties and try different controller inputs such as
•
pressing buttons (CEC_KIT_PC only), shaking the joystick (CEC_KIT_PC only).
When pedaling you should see the Y Axis of the display move. (make sure that
the controller is setup for Joystick Mode)
Reconfigure Cycber ExerCycle to the mode required by your game. For example, in
order to use Cyber ExerCycle with NetAthlon, you need to configure the controller for
NetAthlon mode. If playing such games as Skyrim, use Keyboard and Mouse Mode.
Refer to game specific setup: http://www.cyberbiking.com/games.html
9