Table of Contents
Advertisement
Never add fabric conditioner, starches or any other chemicals to the water in
your iron. Ensure your iron is switched off and unplugged from the mains supply
socket before filling it directly. Do not use demineralised or deionised water to fill
your iron as this may prevent some features from operating correctly.
If you are only using your iron to steam iron small amounts, you can fill the water tank
directly.
1. Set the steam control to the no steam position (
2. Open the water tank inlet cover and fill the water tank with ordinary tap water.
3. Only fill to the MAX marking. Check the water level by standing your iron on its heel.
4. When your iron is filled, close the water tank inlet cover.
For prolonged steam ironing, use the filling dock.
1. Open the water filling port on the filling dock.
2. Fill to the MAX marking with ordinary tap water.
3. Place the filling dock on a flat and level surface. Place your iron onto the filling dock
ensuring that your iron correctly mates with the water outlet. The auto fill indicator on
your iron will light and your iron will automatically pump water from the filling dock
into its water tank until it is full.
).
filling
7
Advertisement
Table of Contents
