Call Waiting; Using Redial; Selecting A Different Channel; Chain Dialing - Sylvania ST88246 Owner's Manual

CALL WAITING

If you have "call waiting" service and a call
waiting tone sounds while you are on a call,
press TALK/FLASH to accept the waiting call.
There is a short pause, then you will hear the
new caller. To return to the original caller, press
TALK/FLASH again.

USING REDIAL

PAUSE/REDIAL calls the last number dialed. The redialed number can be up to 32
digits long.

SELECTING A DIFFERENT CHANNEL

If you encounter interference while using your
phone, you can manually change the channel for
clearer operation. This function works only when
the phone is in use.
During the course of a conversation, if you hear
static or noise which makes it difficult to hear,
press CH/DELETE. The following screen appears.
The phone then changes to a different channel.

CHAIN DIALING

On certain occasions after dialing a number, you may be requested to enter an access
code, such as your account number. You can enter this number into a memory location
for later use by doing the following.
1) Store the access code into one of the memory locations (0-9). See "Storing Phone
Numbers and Names" on the next page.
2) Dial the party or service main number.
3) When you need to enter the special number, press MEM followed by the memory
location (0-9). Then press REMOTE/SELECT.
14