Sony NEX-7 Instruction Manual page 158

Notes
• If the flash is used when the shutter button is pressed, a custom white balance is registered with the flash
light taken into account. Take pictures with the flash in later shootings.
• The message "Custom WB error" indicates that the value is beyond the expected range. (When the flash
is used on a subject in close proximity or a subject with a bright color is in the frame.) If you register this
value, the
but it is recommended that you set the white balance again to get a more accurate white balance value.
Downloaded from www.Manualslib.com
indicator turns yellow on the recording information display. You can shoot at this point,
manuals search engine
99 GB