Table of Contents
Advertisement
Maintaining your Harmony 650
Upgrading your Harmony 650 firmware
Your Harmony 650 contains internal software, called firmware. The remote's firmware is
similar to your computer's operating system.
Logitech updates the firmware for your remote to ensure you're always getting the most
from your Harmony 650. Generally, when you connect your remote to your computer
the Harmony Remote Software updates your remote automatically if new firmware is
available.
However, sometimes you may need to update the firmware manually.
To upgrade your Harmony 650 firmware:
1.
Start the Harmony Remote Software.
2.
Connect your Harmony to your computer using the USB cable.
3.
Click
Downloads.
Firmware.
4.
Click
5.
Follow the online instructions.
Testing your remote settings after a software upgrade
After you finish making any changes to your Harmony 650's configuration, you should test
the new set up to ensure everything is working the way you expect. This testing process
is the same as the you did when you set up your Harmony 650 for the first time. For more
detailed information, see
Upgrading to a new Harmony remote
When you upgrade to a newer model Harmony, you can transfer the configuration from
your old remote to your new remote.
To upgrade to a new model Harmony remote:
1.
Start the Harmony Remote Software.
Remote Settings.
2.
Click
Manage Remotes.
3.
Click
Replace.
4.
Click
5.
Follow the online instructions.
Testing your
setup.
23
Advertisement
Table of Contents
