Selecting Input Source; Picture Settings - Seiki se50fy33 User Manual

CUSTOMIZING TVSETTINGS
Selecting Input Source
. Press the SOURCE button on the
main unit or on the remote control to
display the Input Source list.
° Press A/V buttons to select your
desired input source among: TV/
Component/AV/H DMI 1/HDMI2/
HDMI3/VGA/USBand then press
OK button to confirm.
Picture Settings
• Press the MENU button on the main
unit or on the remote control and
then press 4/_ buttons to select
PICTURE menu.
• Press A/V buttons to select the
following picture options and then
press _/_ buttons to adjust each
option's setting.
Cycle among picture modes: Dynamic/Movie/User/
Standard.
Picture Mode
Alternative: you may press the P.MODE button to
select the picture mode directly.
Contrast Adjust the difference between light and dark levels in
the pictures. (For User mode)
Increase or decrease the amount of white in the picture.
Brightness (For User mode)
Color Control the color intensity. (For User mode)
Tint Adjust the balance between red and green levels.
Sharpness Adjust the level of crispness in the edges between light
and dark areas of the picture. (For User mode)
Color Temperature Cycle among color temperatures: Cool/Normal/Warm.
Allow the blue background to turn On/Off during weak or
Blue Screen
no signal conditions.