Advertisement
Receive Silence +FRS= (Time )
The command +FRS= causes the modem to listen for silence and report
back an OK result code when the line has been silent for the specified
amount of time. The (Time) value is in 10 ms increments from 0 to 2.55
seconds.
The modem aborts the command and sends an OK result code if the
DTE sends an additional character, which is discarded, during the
command execution. This command returns an ERROR result code if
issued while the modem is on hook.
Fax Transmit and Receive Modes
The following commands instruct the modem to transmit or receive
facsimile data with the designated modulation. Flow control, data buff-
ering, and data filtering are used as appropriate, in accordance with the
Class 1 specification. Each of these commands must be the last
command on the command line.
Command
+FTM=(MOD)
+FRM=(MOD)
+FTH=(MOD)
+FRH=(MOD)
The modem accepts one of the values listed in Table 9-1.
Table 9-1. Modulation Values
Value
3
24
48
72
73
74
96
97
Transmit data with (MOD) carrier
Receive data with (MOD) carrier
Transmit HDLC data with (MOD) carrier
Receive HDLC data with (MOD) carrier
Modulation
V.21 channel 2
V.27 ter
V.27 ter
V.29
V.17
V.17
V.29
V.17
Description
300 bps
2400 bps
4800 bps
7200 bps
7200 bps
7200 bps *
9600 bps
9600 bps
V.3400
Fax Operation
Speed
9-7
Advertisement
