napp-it ZFS Storage User Manual page 10

4.1.2 Screenshots of a base setup (asuming you have a Clonezilla USBStick)
Copy the napp-it imagefolder to you USB stick (root directory) and boot your server from the USB stick
1. Start Clonezilla
3. select local_dev (USB drive)
5. select your USB stick as source and select Top
directory on next screen
Your napp-it image must be on another stick/ disk
or partition than CloneZilla itself.
2. select device-image mode
4. Clonezilla is now ready to read the napp-it image
If the image is on an USB(3) stick or disk, insert the
stick now, wait 5s, press enter and select the image.
6. select Beginner mode