Paser MAESTRO 3.0 BLUE Instruction Manual page 7

MAESTRO 3.0 Blue
Configuration 4:
FUNCTION
ON/OFF
Volume +
Volume -
Next Track
Previous Track
Next Playlist/Folder
Previous Playlist/Folder
Play/Pausa
Source
MENU FUNCTIONS
Menu
Next Menu
Previous Menu
Select
PHONE FUNCTIONS
Phone Close
Phone Answer
Volume -
Volume +
In some cars Phone buttons are dedicated to OEM Bluetooth systems and for
this reason can't be used to manage MAESTRO 3.0 Blue.
14
Short Pressure
Long Pressure
CARS WITHOUT LONG CARS WITH
PRESSURE BUTTON LONG PRESSURE BUTTON
INFORMATION INFORMATION
Rev 1.14
ACTIVATION AND TUNING
Once that all connections are done turn on the key:
The LED will switch on fixed GREEN.
By default the system will transmit on the frequency 87.7 Mhz, then set this frequency as favorite
87.7 mHz
MAESTRO
1
.
Each time that the key will turned on the system will switch on automatically and the speech sysn-
thesis system will pronunce the welcome message:
"MAESTRO WISH YOU GOOD LISTENING".
Reproduction will start immediately and RDS text will be shown on the radio and car display.
.
To switch off the module press in sequence from the steering wheel VOL+ VOL—VOL+ VOL - :
SRC SRC SRC MUTE MUTE MUTE SRC SRC SRC MUTE MUTE MUTE
The same sequence could be use to switch on again the interface.
In case of an incorrect working of the steering wheel commands functions,
please make a RESET of MAESTRO 3.0 Blue, as described below, by pressing
the button of the unit till the LED of the module switch OFF.
Rev 1.14
MAESTRO 3.0 Blue
SRC SRC SRC MUTE MUTE MUTE SRC SRC SRC MUTE MUTE MUTE
7