Help with minor problems
Fault displays
Text in display field
and, depending on the
model, a signal
emitted
F01
F02
F04
46
If repairs are needed, and assuming that you cannot
eliminate the fault yourself with the aid the following
table
q Turn the programme selector to Off.
q Disconnect the washing machine from the mains.
q Turn off the tap.
q Call customer service, see Page 52.
d Risk of electric shock!
Repairs may be carried out by customer service
or authorised technicians only.
Possible cause
Door not closed properly.
Tap not turned on.
Inlet hose kinked or pinched.
Filters blocked in water inlet hose.
Water pressure too low.
Loose debris is blocking the pump;
Drainage pipe and/or drainage hose
blocked.
Remedial action
Check whether laundry is trapped
in door;
Close the washing machine door.
Turn the tap on.
Eliminate cause.
Clean filters, see Page 44.
Eliminate cause.
Cleaning the drain pump,
refer to page 42;
Clean drainage pipe and/or
drainage hose.