Programmes; Washing - Siemens WM12B166DN Operating Instructions Manual

Before washing for the first time
Wash once without any laundry
Sorting and loading laundry
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load
Observe the important information
Insert large and small items of laundry.
Close the washing machine door. Take care not to trap items of laundry
between the washing machine door and the rubber seal.
Add detergent and care products
Amount of laundry, soiling, water hardness (ask your water supply
company) and manufacturer's instructions.
our liquid detergent into the appropriate dispenser and place in the drum.
Dilute thick fabric softener and fabric conditioner with water.
This prevents blockages.
Setting and adjusting programmes
Additional function
page 5.
ional Start
tion
on the model)
Programme selector for
switching the machine on
and off and for selecting
the programme. Can be
turned in either direction.
tion or end
page 9.
page 7.
page 6.
Measure accordingly:
1
Individual settings,
2
Select Start

Washing

Detergent drawer with
compartments I, II,
Washing machine door
Control panel
Washing machine
door handle
Service flap
Washing
3
Removing the washing
Open the washing machine door and remove the washing.
– Remove any foreign objects - risk of rusting.
– Leave the washing machine door and detergent
drawer open so that any residual water can
evaporate.
Turning the tap off
Not required for AquaStop models
Installation Instructions, page 7.
Switching off
Turn the programme selector to Off (Fra).
End of programme when ...
... appears on the display panel.
Interrupting the programme
Programmes at high temperatures:
– Cool washing: Select Rinse (Skyl).
3
– Select Start .
Programmes at lower temperatures:
– Select Spin (Centrifugering)/Empty (Udpumpning).
– Select Start .
Changing the programme, if ...
... you have selected the wrong programme by mistake:
– Reselect the programme.
– Select Start . The new programme starts from the
beginning.
Hinweise
4