LG ARNU243S8R2 Installation Manual page 47

Finishing Installation — Wall-Mounted Indoor Units
Mounting the Indoor Unit to the Installation Plate
1. Attach the three (3) hooks on the top of the indoor unit to the
top edge of the installation plate. Verify the hooks are properly
attached to the installation plate by gently shaking the indoor unit
from side to side.
2.
indoor unit against the installation plate until the bottom hooks
snap into their slots (a click will be heard).
Preparing for Piping / Electrical Connections
1.
plate by reversing Step 2 from previous procedure.
2. Unlock the tubing clamp from the indoor unit frame. For easier
the clamp between the indoor unit frame and installation plate.
Final Step
1.
2. Verify the top hooks are properly attached to the installation plate
by gently shaking the indoor unit from side to side.
3.
indoor unit against the installation plate until the bottom hooks
snap into their slots (a click will be heard).
4. Finish the assembly by securing the indoor unit to the installation
-
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Figure 47:
Figure 48: Accessing the Back of the Indoor Unit.
Figure 46: Final Installation Step
Screws
FINAL INSTALL
Installation plate
Tubing Clamp
Piping
Through
Wall
Bottom of
Indoor Unit
47