Connection Diagrams - JVC GM-V42S Instructions Manual

Connection Diagrams

Typical connections
Personal computer
(used as the playback source)
AUDIO
IN
RGB A
External speaker connection
To speaker input terminals
How to connect the cords
Personal computer
(used to control the Monitor)
❊
OUT
MAKE
RS-232C
WIRED
REMOTE
AUDIO
Note:
It is recommended to use the speaker unit—TS-C421SPG (not supplied)
as the external speakers. You can also connect any speakers of the
following specifications:
• Impedance: Between 6 Ω and 8 Ω
• Power handling capacity: More than 3 W
Caution:
• Do not short-circuit the 9 and ( speaker cords each other. (Refer
also to the instructions supplied with the speaker unit when
connecting speakers.)
Remote control
(supplied)
Cable with stereo
mini jacks
(not supplied)
Ferrite core
GM-V42PCEG, and GM-V42S)
• Make sure to attach the ferrite core to
the power cord. See also page 8.
L
R
AC IN
ª
·
·
ª
When using external speakers,
set this to EXTERNAL.
❊
For connection, see page 13.
Amplifier, etc.
Power cord
(supplied)
To a wall outlet
(supplied to GM-V42PCE,
POWER
External speakers
(Ex. TS-C421SPG)
To speaker input terminals
11