JVC LT-47DV1BU Instructions Manual page 23

Change the sound mode (Analogue channel only)


Select the sound mode
Sound
Stereo
MaxxAudio Low
MaxxBass
3
MaxxTreble 3
MaxxStereo 0
Off
MaxxVolume
Voice Enhancer Off
0
Balance
Digital Audio Output PCM
When viewing a bilingual broadcast programme, you can select either

Bilingual I (Sub I) or Bilingual II (Sub II) sound.
If the stereo broadcast reception is poor, you can change to mono sound

for clearer sound.
This button can also be used when watching digital channels. For details,

refer to "Select audio language" (P. 21)
ENGLISH
1 select
2 set
Getting started
Change the aspect ratio


Select the aspect ratio
Zoom
Auto
Regular
Panoramic
14:9 Zoom
16:9 Zoom
16:9 Zoom Subtitle
Full
 When viewing high definition signal, the content of the menu will be
changed.

16:9 Zoom
Move the picture with 1 or 4 while this bar is displayed
"Full Native"
Æ
 "What is "Full Native"?" (P. 48)
When "Slim" is selected, a 4:3 image stretched out to 16:9 will revert back

to its original aspect ratio with black bands.
When "Panoramic Zoom" is selected, a 4:3 image with black bands will be

stretched out to 16:9.
Using "Auto" "Auto in "Zoom"" (P. 45)
 Æ
Note
If an image is displayed in an aspect ratio that differs from its original

aspect ratio, the image will be distorted or portions of the image will be cut
off.
When viewing "PC", only "Full" or "Regular" can be selected.

Basics Advanced
For high definition

signal
Zoom
Full
1 select
Full Native
Slim
Panoramic Zoom
2 set
Etc.