MAGINON ACC-01 Instruction Manual page 14

12
First, the audio cassette converter must be set up as the audio source in the
program by selecting Edit and Settings and then "Audio I/O" for adding "USB
microphone" or "USB audio device".
Next, select File and New to create a new project for making the recordings.
To start recording, simultaneously press the  button on the player and
recording button 3 in the program (see illustration).
3 5
To end recording, press button 5 in the program.
After terminating a recording you can listen to it by using the control buttons of
the program. You can also cut or edit the recording. Further information about the
program functions of the « Audacity » software can be found in the help function
of the program.
As soon as you have completed editing the recording it can be played back in
MP3 format. In this format the recordings can be played back on all devices with
MP3 playback function.
To save a recording in MP3 format, select File and "Export as MP3..." from the
program. In the next window enter a folder on the hard disk and a name for the
recording le and then click on Save. You can then add further information about
the recording and con rm this by clicking on OK.
If during saving in MP3 format the message appears that the le "Lame_enc.dll"
has to be speci ed, you have to specify this on the hard disk. If the LAME
encoding software is not installed on your computer, you can download it from
lame.sourceforge.net and install it.