Podab StreamLine 7065X Service Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Servicemanual

Tvättmaskin TM 7055/7065/7065X

Table of Contents

Need help?

Do you have a question about the StreamLine 7065X and is the answer not in the manual?

Questions and answers

Summary of Contents for Podab StreamLine 7065X

Page 1 Servicemanual Tvättmaskin TM 7055/7065/7065X...
Page 2: Table Of Contents
Spirit TopLine – XLI - EXPORT Service Instructions for Control System 5.5 + 6.5 kg Shared-dwelling Washing Machines TopLine - EXPORT LCD Display 2005 Control unit; small LCD No. 534 725 for Service No. 534 729 Shared-dwelling power unit No. 534 061 for Service No.
Page 3: Parameterising The 534 725 Control Pc Board
Spirit TopLine – XLI - EXPORT 1. Parameterising the 534 725 control pc board 1.1 Settings for after-sales service Parameters may only be set when no washing programme is running and the door of the washing machine is closed. An error message appears on the display if the door is not closed. The setting programme is started by simultaneously pressing and holding the “(1) + 60°...
Page 4 Spirit TopLine – XLI - EXPORT 1.2 Basic settings for the user Parameters may only be set when no washing programme is running. This setting function is blocked with the machine configuration “BLOCKING S- FUNCT.” = “ON”. These functions are also described in the operating instructions of the machines. There are two groups of settings: 1.
Page 5 Spirit TopLine – XLI - EXPORT 2. Extended basic settings To start the setting programme, press and hold the “40° (3) + 60° (4)” buttons si- multaneously and press the “Fast run (15)” button. SKIN PROTECTION FUNCTION ∇ ∇ ∇ ∇ ∇...
Page 6: Spirit Topline
230V, 1N, 3.3 kW 230V, 1N, 2.8 kW 230V, 1N, 1.4 kW 1.5 Machine versions 5.5 kg shared-dwelling models 1400 Spirit Topline 5656 Podab TM 7055 1400 6.5 kg shared- dwelling models 1400 Spirit Topline 6166 Spirit Topline 6176...
Page 7: Description Of The Parameters
Spirit TopLine – XLI - EXPORT 2. Description of the parameters The parameters shown in bold correspond to the basic factory settings of the control units. 2.1 Machine type This setting allows the adjustment of the control system to the different machine sizes. Selection: ;...
Page 8 Spirit TopLine – XLI - EXPORT 2.7 Water supply option This parameter may be set according to the availability of the option. This setting en- sures the correct activation of the solenoid valves during washing and rinsing. This op- tion only works if the additional “S3” water valve is built into the machine. If soft water is present, soft water (S1/S2) is used during washing and hard water (S3) is poured in during rinsing.
Page 9 Spirit TopLine – XLI - EXPORT 2.13 Detergent dosing Selection: DETERGENT INPUT; LIQUID DET. W. INT. CONTROL LIQUID DET. W. EXT. CONTROL For liquid detergent dosing, a liquid detergent module No. 531 947 must be built in. There are separate instructions for liquid detergent dosing. In the case of a built-in liquid detergent module, the detergent chambers are also rinsed out.
Page 10: Error Messages
Spirit TopLine – XLI - EXPORT 3. Error messages If an operating error has occurred, the programme can be continued by pressing the “Start button (13)”. When the error has been remedied (e.g. water supply), the control system repeats the part of the programme in which the error occurred. Exception: If the “...
Page 11 Spirit TopLine – XLI - EXPORT 3.3 Hardware errors Display Error type Cause Power supply defective Check power input dark Check power supply to power unit. + 12 V → → → → GND = 12 Volt, DC Control unit: + 5 V →...
Page 12 Spirit TopLine – XLI - EXPORT Water level too high The maximum water level has been reached. F-17 The water intake has not been interrupted. The drainage pump is switched on and re- mains active for an unlimited time. Water intake without a The test level is reached e.g.
Page 13 Spirit TopLine – XLI - EXPORT 3.6 CS / wash card / liquid detergent module errors Display Error type Cause No connection to the CS module not connected or defective. F-50 CS module Programming The parameterisation in the washing machine F-51 does not match the parameterisation in the CS module.
Page 14 Spirit TopLine – XLI - EXPORT Display Error type Cause Wrong card type e.g. wrong card inserted in charging mode or charging card with incorrect authorisation Card contact problem Insert card again Card defective Washing programme started Insert card without release Card function barred Admin.
Page 15: Test Programmes
Spirit TopLine – XLI - EXPORT 4. Test programmes 14 test programmes are stored permanently in the machine. Test programmes may only be called up if no washing programme is running and the door of the washing machine is closed. The preset safety and monitoring functions for the washing process are active during the test programmes.
Page 16 Spirit TopLine – XLI - EXPORT 4.1 Test functions 1. High-voltage test 2. Washing programme (test programme) 3. Drainage pump 4. Water valves 5. Reversing without water 6. Spinning 7. Water intake to washing level and then to rinsing level without reversing 8.
Page 17: Water Valves
Spirit TopLine – XLI - EXPORT 4.4 Drainage function: Display: The pump runs for approx. 30 seconds while the washing liquor tank is empty. The drum does not TEST PROGRAMME revolve during pumping out. DRAINAGE FUNCTION 4.5 Water valves: Display: This programme tests the water valves.
Page 18: Led Display
Spirit TopLine – XLI - EXPORT 4.9 LCD display: Display: A chessboard pattern is shown on the LCD. The dark and light squares alternate at 30-second in- TEST PROGRAMME TEST LCD DISPLAY tervals. All the dots within each field must be “On or Off”.
Page 19 Spirit TopLine – XLI - EXPORT 4.14 CS / Washcard / liquid detergent module Testing the module requires service card No. 520 698 (with a red handle). When the service card has been inserted, a test programme runs in the CS module. Indications displayed during this test programme: - CS VERSION 645 (current status)
Page 20: Operating Data
Spirit TopLine – XLI - EXPORT 5. Operating data The display programme for the operating data can be called up when the machine is idle or running. Calling up the display function: The display function is selected by simultaneously pressing and holding the two but- tons “95°...
Page 21 Spirit TopLine – XLI - EXPORT Display: Number of operating hours for the washing ma- chine. OPERATING DATA OPERATING HOURS Display: The software version is shown as a 6-digit drawing number and the revision index with two letters. The date corresponds to the start of production of OPERATING DATA SOFTWARE VERSION this version.
Page 22: Wash Programmes
Spirit TopLine – XLI - EXPORT 6. Wash programmes 5.5kg shared dwelling 6.5kg shared dwelling Water Water Temp. consump- Power Pro- consump- Power Programme Programme tion consump- gramme tion consump- [° C] time [min.] [litres] tion [kWh] time [min.] [litres] tion [kWh] Test Boil / coloured wash...
Page 23 Spirit TopLine – XLI - EXPORT Special programmes “S” 5.5kg shared dwelling 6.5kg shared dwelling Water Water Temp. consump- Power con- consump- Power con- Programme Programme tion sumption Programme tion sumption [° C] time [min.] [litres] [kWh] time [min.] [litres] [kWh] Wool Hand washing...
Page 24 Spirit TopLine – XLI - EXPORT Special programmes “P“ for nursing and care homes 5.5kg shared dwelling 6.5kg shared dwelling Water Water Temp. consump- Power con- consump- Power con- Programme Programme tion sumption Programme tion sumption [° C] time [min.] [litres] [kWh] time [min.]...
Page 25 Spirit TopLine – XLI - EXPORT 5.5kg shared dwelling 6.5kg shared dwelling Temp Water Water consump- Power con- consump- Power con- Programme Programme tion sumption Programme tion sumption [° C] time [min.] [litres] [kWh] time [min.] [litres] [kWh] Mains connection reduced: Boil wash / coloureds Easy care 534 817AD...
Page 26 Spirit TopLine – XLI - EXPORT Increased water level: AAA standard progs. Cotton Boil wash / coloureds Boil wash / coloureds Intensive Boil wash / coloureds Express Boil wash / coloureds with prewash Easy care standard programmes Easy care Easy care Intensive Easy care Express...
Page 27: Operating Concepts
Spirit TopLine – XLI - EXPORT 7. Operating concepts 7.1 User screen UI-TAB 08 – Control unit No.: 534 725 SCHULTHESS 6.5 kg shared d. - Spirit XLI 6176 (1400 rpm) - TM 7065 X (1400 rpm) 1 ÷ 11/29 Wash prog.
Page 28: Replacement Of Power Units
Spirit TopLine – XLI - EXPORT 8. Replacement of power units There are coding resistances on the power units for the shared-dwelling appliances. The resistances listed serve only to simplify the identification of the power units. They are not electrically connected. Shared-dwelling power unit: 534 061: R 124 equipped...

This manual is also suitable for:

Streamline tm 7055 Streamline 7065