Peripheral Equipment Connections - Supra 3P52E CHASSIS Service Manual

Operation Instructions

PERIPHERAL EQUIPMENT CONNECTIONS

There is a wide range of audio and video equipment that can be connected to your TV.
Connection diagrams at the end of this section show you where the different equipment should be
connected at the backside of the TV.
Aerial socket
1. Connect the RF out socket of the VCR to the aerial socket on the back of the set.
2. Connect the aerial cable to the RF aerial in socket of the VCR.
3. Select the program number where the VCR channel is stored.
4. Press the PLAY button on the VCR.
Audio/ Video in sockets
1. Connect the audio/video out sockets of the VCR to audio/video in sockets of the set.
2. Press the AV/TV button to select AV.
3. Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
Note:If you wantto watch the signals from the input jacks on the front panel,disconnect
the Euro scart socket of the VCR from the Euro scart socket on the back of the set.
Precautions when connecting to other equipments
When using external equipment with this TV, please read the instruction manual of the external
equipment.
Switch off all power supplies to the equipment and TV before connection.
Always ensure that the input and output terminals are correctly connected..
32