Troubleshooting Tips - GE CV966 Owner's Manual & Installation Instructions

Troubleshooting tips ... Before you call for service
Save time and money! Review the charts on the following pages first and you may not need to call for service.
Problem
Fan does not operate when
the switch is on
Fan fails to circulate air
or moves air slower than
normal
20
Possible Cause
A fuse may be blown or a
circuit breaker tripped.
The blower connector is loose
or not plugged into its mating
connector.
Excessively soiled filters.
What To Do
Replace fuse or reset circuit breaker.
Disconnect power to the unit. Remove the filters and
look up at the blower. If the blower connector plug is
loose or you see the connector dangling, the installer
failed to plug it in securely. Although it is a blind
connection, it is easy to plug in. See the Installation
Instructions in this manual for the plug location and how
to plug the connector in.
Remove the filters, clean if necessary and replace them.
If cleaning and replacing the filters does not correct the
problem, call for service.
Sufficient makeup (replacement) air is required for
exhausting appliances to operate to rating. Check with
local building codes, which may require or strongly
advise the use of makeup air. Visit GEAppliances.com
for available makeup air solutions.
49-80520-8