Panasonic EBL512 Specification Sheet page 3

________________________________________________________________________
• The inter activity function is
using information from one, two
or a larger number of detectors
in the system to provide a more
secure detection of a real fire.
• A family of state of the art
analog detectors gives the c.i.e.
accurate and
information about occurrence of
smoke and/or
changes in the installation.
The analog detector types 33xx (left) received
a design award at the 1998 Hanover Exhibition.
The newer analog detector types 43xx (right)
have an even more attractive & slender design.
A large variety of units can be
connected to the four COM loops:
• Analog detectors
• Conventional detectors
• Intrinsically Safe (IS) detectors
• Water proof heat detectors
• Addressable manual call points
• Addressable short circuit iso-
lators
• Addressable I/O units (inputs /
supervised voltage outputs as
well as relay outputs)
• Addressable sirens / sounder
bases
The EL512 fire alarm system has
a set of functions that meets the
most stringent
relating to fire detection, fire
presentation and measures.
• Service signal is given when a
detector is contaminated to a
certain level.
• A
large number
algorithms is supported by the
system and can be set for each
analog detector individually.
2008-08-20
Fire alarm system EBL512
noise free
temperature
requirements
of alarm
Panasonic Electric Works
Fire & Security Technology Europe AB
• Alert annunciation. The output
for the alarm transmitter can be
delayed for immediate on site
investigation of a fire alarm.
• Individual
detectors,
programmable
outputs for the alarm transmitter
can be individually disabled.
• Internally
and/or
controlled time channels. E.g.
one or more alarm points may
be disabled via a time channel.
• Outputs can be programmed in
a very flexible way enabling
control of sirens, fire doors,
extinguishing systems etc.
• External Fire brigade panels
can be connected to each c.i.e.
• Presentation
system status in a PC or
Pocket-PC via the Web-server
II connected to an intranet
(LAN) or Internet.
control with encrypted and safe
two-way communication.
case of fire alarm, service signal
etc. e-mails can be sent to the
adequate personnel.
also one-way communication to
an external computer system.
• The Web-server II (the HW)
can be used with the OPC512
SW and connected to a PC with
Panasonic FP OPC Server SW
for a reliable connection to your
industrial applications (clients).
The TLON Network
Up to 30 nodes (i.e. EBL512 c.i.e:s)
can be connected to a TLON
Network. One of the nodes can be
an external PC with a software
driver for a Security Management
system, which gives full control of
and access to all data in all
EBL512 connected to the network.
zones,
outputs and
externally
of the actual
Remote
In
Provides
Page 3 of 6