Page 1
Video Tracking System Video Series Installation and Operating Manual V 1.0...
Page 2
The equipment must be connected to earth! This product conforms to the rules of the European directive 2004/108/EC. If any detailed information needed, please contact your local agent or TAIDEN Service Center. Any feedback, advice and suggestion about the products is appreciated...
Page 3
Service Center. Follow all instructions. Do not use this apparatus near water. 18. All TAIDEN products are guaranteed for definite time Clean only with dry cloth. (see the WARRANTY CARD for details) excluding the Do not block any ventilation openings. Install in following cases: accordance with the manufacturer’s instructions.
Page 4
Important Safety Instruction The exclamation mark within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: To reduce the risk of fire or electric shock, DO NOT expose units to rain or moisture.
Installation & User Guide About this manual This manual is applicable to: This manual is a comprehensive guide for TAIDEN HCS-3313C Video Tracking System, mainly includes functions and High Quality Speed Dome Camera (ceiling) interface descriptions of High Quality Speed Dome...
Chapter 1 High Quality Speed Dome Camera 1.1 Overview High speed presetting dome PTZ camera (hereinafter Technical Specifications referred to as "camera") is a high-tech monitoring Power supply DC 12±3 V product of a collection of high resolution color camera, Daytime: 15 W universal variable speed pan/tit and multifunctional Power consumption...
1.2 External cable connection method Power connector Camera external inlet cables are all connected to Please carefully check the power supply voltage and RS485 lightning protection adapter, which is connected current. The power supply voltage for the camera is to the camera through a 0.8-meter-long RJ45 cable 12VDC and the current must be 2A or more.
1.3 Protocol and address code setup Control protocol, baud rate and camera address code 1.3.2 Setup address code should be configured before installation. There are two switches on PCB. 1.3.1 Switch for protocol and baud rate Address code of the camera should be configured before using.
Chapter 2 Speed Dome Camera Control Keypad 2.1 Overview 2.2 Connection between keyboard and system The keyboard is a tiny, easy to use, clear and small direct-control keyboard. It can control multiple cameras with full functionality through RS485 BUS. If you use control systems from other company, due to that different platforms have different specific operation method.
2.3 Keyboard instructions 5. Recall preset position 1. Select communication protocol Preset position can be recalled in several ways: After the keyboard plugged in external cable, just press 1> Manually: "F4" key and current selected communication protocol a. Select camera; will be displayed on screen.
Page 12
TAIDEN INDUSTRIAL CO.,LTD. Copyright by TAIDEN Last Revision: 08/2012...