Supplied Accessories; Maintenance; Preparing The Remote Control; Making The Connections - Panasonic SC-PMX9 Operating Instructions Manual

Hide thumbs Also See for SC-PMX9:
Table of Contents

Advertisement

Available languages

Available languages

Supplied accessories

Check and identify the supplied accessories.
1 x AC mains lead
1 x Remote control
(N2QAYB000896)
1 x FM indoor antenna
1 x Remote control
battery
2 x Speaker cables

Maintenance

• To clean the main unit, wipe with a soft, dry cloth.
• To clean the speakers, wipe with a fine-textured and
dry cloth such as a microfibre cleaning cloth.
• Never use alcohol, paint thinner or benzine to clean
this system.
• Before using chemically treated cloth, read the
instructions that came with the cloth carefully.

Preparing the remote control

R6/LR6, AA
• Use alkaline or manganese battery.
• Install the battery so that the poles (+ and –) align with
those in the remote control.
• Point the remote control at the remote control sensor,
away from obstacles, at a maximum range of 7 m
directly in front of the main unit, within an angle of
approximately 30° to the left and right.

Making the connections

Connect the AC mains lead only after all the other
connections have been made.
2 2 1 1
3 3
To household mains socket
1
Connect the FM indoor antenna.
Place the antenna where reception is best.
• Use an FM outdoor antenna if radio reception is poor.
2
Connect the speakers.
Black
Red
Cable with
a red line
Be careful not to cross (short-circuit) or reverse
the polarity of the speaker wires as doing so may
damage the speakers.
• Connect the cable with a red line to the red terminal
(r).
3
Connect the AC mains lead.
Do not use an AC mains lead with other equipment.
Conserving power
The system consumes approximately 0.4 W when it is in standby
mode. Disconnect the power supply if you do not use the system.
Some settings will be lost after you disconnect the
system. You have to set them again.
Connecting other equipment
You can connect a VCR, DVD player etc.
DVD player (not supplied)
Tape
(not supplied)
Audio cable (not supplied)
Note:
• Disconnect the AC mains lead before connection.
• Switch off all equipment and read the appropriate operating
instructions.
• Components and cables are sold separately.
• If you want to connect equipment other than those
Red
described, refer to the audio dealer.
• Sound distortion can occur when you use an adaptor.
• For information on the connection of a LAN cable, refer to
page 6.
Black
Rear panel of
this main unit
3
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents