Advertisement
3312F
Analog base with fast connectors (blue) for the COM loop.
3312FL
Analog base with fast connectors (blue) for the COM loop and fast
connectors (grey) for one ext. LED (e.g. 2218).
3390
Label holder (100 holders per packet, excl. labels)
3391
Labels for 3390 (10 sheets à 132 labels)
Ext.
LED
Al
IN
Lss (430x)
15
6.2
The base is prepared for mechanical locking of the detector, when a detector with a locking
screw is plugged into the base. Connector wire ∅ 0.6 – 1.2 mm (approx. 0.28 – 1.13 mm
wire ∅ 0.6 mm is used the release button may be pushed as the wire is pressed into the
connector. Analog detector types 33xx and 43xx can be plugged in the base 3312F / FL.
Voltage (V DC)
Rated
allowed
normal
Current consumption at nom. volt.
from COM loop (mA)
quiescent (base only)
active (base only)
Ext. LED connectors (3312FL only)
voltage (V)
max. current output (mA)
Ambient temperature (°C)
Operating
storage
Ambient humidity (% RH)
Ingress Protection rating (estimated)
Size ∅ x H (mm)
Weight 3312F / 3312FL (g)
Construction / Colour
Approvals
All technical features and data are subject to changes without notice, resulting from continuous development and improvement.
Product Leaflet
MEW01119
Type number
Connectors
E+ and E-
not on 3312F
Lss (33xx)
50 mm
73 mm
102 mm
Technical data
28
12-30
24 (COM loop voltage)
Depending on the type of detector that is plugged into the base.
0
0
Depending on the detector plugged in the base. Normally:
5
2
-10 to +50
-20 to +70
max. 95, non condensing
IP51
102 x 15
41 / 47
ABS / Grey (N8, Munsell colour code)
CE; Conforms with EN54-5 and -7 (when applicable)
Date of issue
2008-09-19
OUT
SA Fast connector for COM loop (in/out)
SB Fast connector for COM loop (in/out)
Al
Address Label
Lss Locking screw stopper (for detector
type 33xx and 430x respectively)
E-
Fast connector for external LED
E+ Fast connector for external LED
NOTE! E- and E+ on 3312FL only.
Revision / Date of revision
2
). If
Advertisement
