Wireless Rear View Mirror RC-200 with Reversing Camera Warranty Details The product is guaranteed to be free from defects in workmanship and parts for a period of 36 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion.
Page 3
1 800 623 432 info@supra-electronics.com AFTER SALES SUPPORT 1 800 623 432...
General Preface General Dear customer, Read and keep instructions Congratulations on purchasing a high quality MAGINON product. This Operating Instruction belong to this You have chosen a modern Wireless Rear View Mirror with Wireless Rear View Mirror with Reversing Camera. It contains important information Reversing Camera with excellent technical equipment and about the start up and handling.
General Safety This symbol indicates useful additional Explanation of symbols information for the assembly or operation. The following symbols and signal words are used in these Operating Instructions, on the device or on the packaging. Safety Danger! Correct use These signal words indicate a high level hazard which could The Mirror with Reversing Camera is solely designed to be cause death or serious injury if not avoided.
Page 7
Safety Safety − Damaged mains cables of the Rear View Mirror and the WARNING! Reversing Camera must be replaced by the manufacturer or customer service or a similar qualified person. − Do not open the housing but have repair carried out by Electrocution hazard! an expert.
Safety Start Start newspaper, table clothes or curtains. − Never place the Mirror with Reversing Camera on or near hot surfaces (e.g. stove tops, etc.). Preparing the Mirror with Reversing Camera − Ensure that the mains cable does not come into contact −...
Connection of camera To supply your camera with power it must be connected Installation of camera to the connecting cable of your vehicle´s reversing lights. The camera is then activated every time the reverse gear is The camera must be mounted to the rear end of your vehicle. selected.
Power supply Installation of mirror Power supply Attach the mirror and integrated display to the existing rear To supply the mirror with power connect it to the USB car view mirror of your vehicle as follows: Position the bottom adaptor using the USB cable and plug the adaptor into the fixture on the rear of the mirror against the bottom of the rear cigarette lighter socket of the vehicle.
Power supply Declaration of conformity Declaration of conformity Displaying the camera image As soon as the mirror is supplied with power it is ready for The EC Declaration of Conformity can be use. Now switch your car into reverse gear which will activate requested from the below address.
Technical specification Storing When not in use please disconnect the Mirror with Reversing Model: RC-200 Camera from the power supply and store it in a clean and dry Sensor: 1/3“ CMOS colour sensor place outside of the reach of children.
Cleaning Disposal Disposal Danger from incorrect operation! Incorrect use of the Mirror with Reversing Camera Disposal of packaging can cause the Mirror with Reversing Camera to be damaged. For disposal, separate packaging into different − Do not use any aggressive cleaners, brushes types.
Wireless Rear View Mirror RC-200 with Reversing Camera Repair and Refurbished Goods or Parts Notice Unfortunately, from time to time, faulty products are manufactured which need to be returned to the Supplier for repair. Please be aware that if your product is capable of retaining user-generated data (such as files stored on a computer hard drive, telephone numbers stored on a mobile telephone,...
Need help?
Do you have a question about the RC-200 and is the answer not in the manual?
Questions and answers