Yamaha RX-V750 Owner's Manual page 60

SETUP MENU
FRONT
Front speakers
Choices: LARGE, SMALL
[SMALL
• Select LARGE if you have large front speakers. The
unit directs the entire range of the front left and right
channel signals to the front left and right speakers.
• Select SMALL if you have small front speakers. The
unit directs the low-frequency signals of the front
channel to the speakers selected with "BASS OUT".
Surround left/right speakers
Choices: LARGE, SMALL, NONE
SURR.LR
NONE [SML
• Select LARGE if you have large surround left and right
speakers. The entire range of the surround channel
signal is directed to the surround left and right
speakers.
• Select SMALL if you have small surround left and
right speakers. The low-frequency signals of the
surround channel are directed to the speakers selected
with "BASS OUT".
• Select NONE if you do not have surround speakers.
This will set the unit to the Virtual CINEMA DSP
mode (see page 36) and automatically set the surround
back speaker setting (SURR.B below) to NONE.
56
FRONT
LARGE
SURR.LR
LRG
Surround back left/right speakers
SURR.B
Choices: LRGx2, LRGx1, SMLx2, SMLx1, NONE
SURR.B
SWLx1 [SMLx2
• Select LRGx2 if you have 2 large surround back
speakers. The unit directs the entire range of the
surround back channel signal to the surround back
speakers.
• Select LRGx1 if you have a large surround back
speaker. The unit directs the entire range of the
surround back channel signal to the left surround back
speaker.
• Select SMLx2 if you have 2 small surround back
speakers. The low-frequency signals of the surround
back channels are directed to the speakers selected with
"BASS OUT".
• Select SMLx1 if you have a small surround back
speaker. The low-frequency signals of the surround
back channel are directed to the speakers selected with
"BASS OUT", and the rest of the frequency signals are
directed to the left surround back speaker.
• Select NONE if you do not have a surround back
speaker. The unit directs all of the surround back
channel signal to the surround left and right speakers.
Note
If you select LRGx1 or SMLx1, connect a speaker to the left
SURROUND BACK speaker terminals.
Presence speakers PRESENCE
Choices: NONE, YES
PRESENCE
NONE
• Select YES if you have presence speakers.
• Select NONE if you do not have presence speakers.
[YES