Table of Contents
Advertisement
Video System:
A/V Switching:
Power:
Aux Audio Outputs:
Left and Right Fixed (300mV typical, 600 load min.)
Current Consumption (stand-by mode):
Current Consumption (on, but no VCP):
Current Consumption (with one VCP on):
Audio Noise Floor (30KHz BW):
THD+N @ -10dBV, 1KHz (30KHz BW):
Cross talk @ 1KHz:
Maximum Input Level, Audio L and R:
Frequency Response, 20Hz – 20KHz:
Frequency Response, 40Hz – 16KHz:
Channel Balance:
Volume Control:
Unit Weight:
Audio Output Min. Load Requirement:
Note: Specifications are subject to change without notice.
Tuner cable ready when used in conjunction with other remote control from accessory list.
It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped with a television viewer or screen
that is located in the motor vehicle at any point forward of the back of the driver's seat, or that is visible directly or
indirectly, to the driver while operating the vehicle. This product should only be installed to the rear of the back of the
driver's seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle.
Specifications
NSTC Analog Composite Video (1V P-P, 75 )
3 channels
10-16 VDC, Negative Ground
Left and Right Variable (800mV max, 8 load min.)
67mA
635mA
1.5A
1.164mV (-58dB re:1V)
0.356%
60dB
800mV
1.5dB
0.5dB
0.5dB, 0.05dB Typical
Dual 64 position log taper w/true 1dB/step accuracy
8.5 lbs.
4
Warning
12
Advertisement
Table of Contents
