Yamaha RX-V779 Supplement Manual page 4

SOURCE
SOURCE RECEIVER RECEIVER
HDMI
1 2 3 4
5 V-AUX
AV
Input selection key
1 2 3 4
5 6 AUDIO TUNER
BLUETOOTH USB NET PHONO
MAIN MAIN ZONE 2 ZONE 2 PARTY PARTY HDMI OUT HDMI OUT
SCENE
BD
SCENE
TV NET RADIO
DVD
PROGRAM PROGRAM MUTE MUTE VOLUME VOLUME
TOP MENU TOP MENU POP-UP/MENU POP-UP/MENU
ON ON
SCREEN SCREEN OPTION OPTION
ENTER ENTER
RETURN RETURN DISPLAY DISPLAY
BAND BAND
MODE MODE
TUNING TUNING PRESET PRESET
SUR. DECODE SUR. DECODE STRAIGHT STRAIGHT
MOVIE MOVIE MUSIC MUSIC
ENHANCER ENHANCER PURE DIRECT PURE DIRECT
INFO INFO SLEEP SLEEP
1 2 3 4
Numeric keys
5 6 7 8
MEMORY
9 0 10 ENT
TV TV
INPUT INPUT
TV VOL TV VOL TV CH TV CH
MUTE MUTE CODE SET CODE SET
Changing the external device assigned to
the SCENE keys
If you want to control your playback device after selecting a scene,
follow the procedure below.
1
If you have not registered the remote control code
for the device yet, follow "Registering the remote
control codes for playback device" (p.3).
2
Hold down the corresponding SCENE key and input
selection key together for more than 3 seconds.
Once the setting is successfully completed, the SOURCE indicator
blinks twice.
If it blinks six times, the setting has failed. Repeat step 2.
Resetting remote control codes
You can reset a remote control code registered to each input
selection key.
1
Press CODE SET.
SOURCE blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 1.
2
Press the input selection key.
3
Use the numeric keys to enter "5098".
Once the remote control code is reset successfully, SOURCE blinks
twice.
If it blinks six times, resetting has failed. Repeat from Step 1.
To reset the remote control to factory default settings
a Press CODE SET.
b Press RECEIVER.
c Use the numeric keys to enter "9981".
4
En