Relay Playback; Play Trim Control Adjustment (Kx-W421 Only) - Yamaha KX-W421 Owner's Manual

Example: KX-W421
RELAY PLAYBACK - To play DECK A and DECK B sequentially
Load the cassette tapes into DECKs A and B, start playback from DECK A.
The playback patterns differ according to the setting of the MODE button. Refer to the following.
When the MODE button is set to
DECK A (forward side \ reverse side) \ DECK B (forward side \ reverse side)
5
When the MODE button is set to
DECK A (forward side \ reverse side)
5
Up to 8 times
When the MODE button is set to
DECK A (forward side \ reverse side)
÷ When the tape running direction is set to ™, only the reverse side is played.
When the MODE button is set to
DECK A (forward side or reverse side)
PLAY TRIM CONTROL ADJUSTMENT ( KX-W421 only)
When the level of high frequencies is either over emphasized or absent while playing a tape recorded on another cassette deck,
adjust the high frequency response with the PLAY TRIM control.
When high frequencies are too loud,
attenuate the high frequencies.
When high frequencies are too soft, boost
the high frequencies.
8
NATURAL SOUND CASSETTE DECK KX-W421
RESET
%
CLOSE
!
Cassette Stabilizer
DECK A
PLAYBACK
SEARCH
STANDBY/ON
MODE DOLBY NR EJECT
O / p / ∏ / RELAY
OFF/ B/ C
MODE
:
RELAY
Up to 8 times
:
DECK B (forward side \ reverse side)
:
DECK B ( forward side \ reverse side)
:
DECK B (forward side or reverse side)
PLAY TRIM
0
PLAY TRIM
0
DIRECTION DIRECTION RESET
%
CLOSE
⁄ ! ⁄
PLAY PLAY
RECORD/PLAYBACK
& MUTE/SEARCH & REC/PAUSE
PLAY TRIM
0
DUBBING A # B EJECT
NORMAL HIGH
– +
PLAY TRIM
5
Up to 8 times
1
High frequency sound is too loud.
2
Flat
3
High-frequency sound is too soft.
Cassette Stabilizer
DECK B
REC PHONES
BALANCE LEVEL
0
L R MIN MAX
Display
10 dB
100
1k 10kHz
RELAY
1
2
3