Table of Contents
Advertisement
Attach a lens.
4
Be careful to prevent dust from entering the camera when the
lens or body cap is removed.
s
Mounting mark
(camera)
Mounting mark (lens)
5
Turn the camera on.
Rotate the power switch to turn the
camera on. The power lamp will
briefly light green and the monitor
will turn on. Be sure to remove the
lens cap before shooting.
A
Turning the Camera Off
To turn the camera off, rotate the power
switch again. The monitor will turn off.
Check the battery level and number
of exposures remaining in the moni-
tor (0 17).
22
Keeping marks aligned, position lens on
camera, then rotate until it clicks into place.
Mounting mark (lens)
Battery level
Exposures remaining
Advertisement
Table of Contents
