Call Barring; Switching Party; Talking With All Parties - SoftBank 821SC Instruction

Switching Party

a
While connected with
multiple parties, highlight
party → c (Multi talk) →
Switch
When the connected party ends the call during
●
Conference Call, a party on hold remains on-hold
state. To talk with the party on hold, press c
(Answer) and cancel on-hold.

Talking with All Parties

a
While connected with
multiple parties, c (Multi
talk) → Call to all
To talk with one party again, highlight party,
●
press c (Multi talk), and select Call to
this person
To end all calls, press c (Multi talk) and select
●
End all calls.
When one party ends the call during Conference
●
Call, continue talking with remaining parties.
Advanced
brP.3-25

Call Barring

Bar outgoing/incoming Voice, Video Calls or SMS
by the conditions listed below.
Item Description
Outgoing Calls
Disables calling or sending
Bar all
SMS to all but emergency
outgoing calls
numbers.
Bar all Disables calling or sending
international SMS to numbers outside
calls Japan.
Incoming Calls
Bar all Blocks all incoming calls or
incoming calls SMS.
Setting Call Barring requires Network Password (the
●
4-digit number dedicated to Call Barring service
specified at the subscription). Network Password can
f
be changed ( P.3-19).
A message appears indicating that outgoing Call
●
Barring is active. The message may appear after a
while depending on service area.
3
3-17