Configuration In The Ap Mode; Configuration In The Repeater Mode; Configuration In The Wireless Isp Mode - 8 Level WRP-300 Quick Installation Manual

2.2.2 Configuration in the AP mode:

After clicking on the icon AP configuration window will appear where you can enter basic
configuration parameters for this mode.
Enter the parameters of the access point (AP) of the wireless network:
a) In the SSID field, enter the name of your network (the default network name
is 8level-Net)
b) In the Channel field, set the radio channel of the access point (default auto)
c) In the Security Mode, select the type of security (recommended WPA2 Personal)
d) In the Key, enter the wireless security key
Then press the Save & Reboot to approve the settings. The device will then reboot - wait
until you see the appropriate message.
-6-
From the available in your area wireless networks, select the wireless network of your
Internet Service Provider (ISP). Press the Select button next to the selected network.
In the Key field please enter the wireless security key that allows connection to a specified
network (supplied by your ISP).
Then press the Save & Reboot to approve the settings. The device will then reboot - wait
until you see the appropriate message.
NOTE: when you select Expansion Enable Wireless field device allows you to create a
local wireless network.
-9-

2.2.3 Configuration in the Repeater mode:

After clicking on the icon Repeater configuration window will appear where you can enter
basic configuration parameters for this mode.
Enter a parameters broadcast wireless network:
a) In the SSID field please enter the name of your network (We suggest you keep the
name of the network which enlarge the range but it is not a necessary condition)
b) In the Key, enter the wireless security key (it must be the same as in the network
which enlarge the range)
-7-
CHAPTER III (Features and specification)
Compliant with IEEE802.11 b/g/n
Data transfer speed up to 300Mbps
WPS button enables to easily establish an encrypted connection
QoS function enables to set priorities for services, which provides high quality of data
transfer, e.g. during transmission of picture and sound
Supported encryption types: 64/128 bit WEP, WPA/WPA2, WPA-PSK / WPA2-PSK
(TKIP/AES)
Specification
Standard IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
802.11n : up to 300Mbps
Data transfer 802.11g: up to 54Mbps
802.11b: up to 11Mbps
Frequency 2.4-2.4835GHz
Power <20dBm (max EIRP)
130M: -68dBm@10%
108M: -68dBm@10%
54M: -68dBm@10%
Receiver sensitivity
11M: -85dBm@8%
6M: -88dBm@10%
1M: -90dBm@8%
Encryption 64/128 bit WEP, WPA/WPA2, WPA-PSK / WPA2-PSK (TKIP/AES)
1x WAN 10/100Mbps
Ports
1(2)x LAN 10/100Mbps
Working mode
Router, AP, Repeater, WISP, Client, Bridge
Antenna 2*internal
Connection RJ-45
Power 100-240V - 0.2A 50/60HZ
Working temperature 0˚C–40˚C (32˚F–104˚F)
Working humidity 10%–90%
-10-
Then press the Save & Reboot to approve the settings. The device will then reboot - wait
until you see the appropriate message.

2.2.4 Configuration in the Wireless ISP mode:

After clicking on the icon Wireless ISP configuration window will appear where you can
enter basic configuration parameters for this mode.
-8-
__ _ _
www.8level.eu
-11-