DC Matic TL-900 User Manual

Work Area Safety

Keep work area clean and well lighted. Cluttered or dark areas invite accidents. Use the LED
light work light on the

Do not operate the
flammable liquids, gases or dust. Although the
enclose sparks, its exterior metal parts may create sparks that can ignite flammable materials.

Keep bystanders, children and visitors away while operating the
can cause you to lose control.

Make sure vehicles are braked, chocked and stable.

Use extreme caution when working on or around a vehicle on a jack.
Electrical Safety

The Anderson quick connector ( shown in Fig. 1) on your
Anderson quick connector. Mismatched connectors create the risk of electrical shorting.

Make sure the cables, switches and power connector are in good working order
before making a secure connection. Damaged cables, plug, switches or receptacles will reduce
the amount of power available to the tool and potentially cause damage to it or the vehicle.

Do not immerse the

Do not abuse the power cables. Never use the cord for carrying, pulling or unplugging the
tool. Keep the cables away from sharp edges and moving parts.

Make sure the power cables are free from snags and tangles before operating the tool sys-
tem.
Personal Safety

Always stay alert and use common sense when operating the
the tool while tired or under the influence of drugs, alcohol or medication. The
is a very powerful tool that can cause serious personal injury and property damage if not properly
used.

Use safety equipment. Always wear eye and ear protection. Safety equipment such as dust
masks, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will
reduce personal injuries.

Avoid accidental start up of the
plug immediately when work is completed. Keep the trigger free from obstructions.

Make sure any attachments such as sockets, adapters and torque extensions are secured to
the tool's square drive prior to operating the

Do not overreach. Keep proper footing and balance at all times. Make sure cables are free
from snags and tangles when using the

Dress properly. Do not wear loose fitting clothing or jewelry. Make sure hair, clothing and
gloves are away from moving parts.

Keep your Model TL-900
make it difficult to safely control this powerful tool.
Model TL-900
Safety and Use Manual
24-30 VDC Powered
3/4 Inch Drive Impact Wrench System
Model TL-900 (shown in Fig. 1) whenever possible to reduce injuries.
Model TL-900 in explosive atmospheres, such as in the presence of
Model TL-900 in standing water.
Model TL-900
Model TL-900
handle clean from oil and grease. Holding a slippery handle will
Model 900 incorporates safety measures that
Model TL-900
Model TL-900.
by applying power only when ready to use. Un-
Model TL-900.
off the ground.
Model TL-900. Distractions
must match another
Never operate
Model TL-900