PQI Air Cam
User manual- "PQI Air" Cam
LCD screen
POWER/
MODE button
LED indicator
Battery compartment
Inserting the Battery
Warning
Use only the supplied battery or a similar battery recommended by the
manufacturer or your dealer.
1. Push down the battery compartment
cover to open it.
2. Align the battery contacts and
then insert the battery into the
compartment.
SHUTTER/SELECT button
Lens
Microphone
SD card and connectors compartment
3. Close the battery compartment cover.
To remove the battery
1. Open the battery compartment.
2. Pull the ribbon to remove the battery.
Inserting the SD Card
An SD card is required to capture photos and videos. The video
camera supports SDHC cards up to 32GB.
1. Open the SD card and connectors cover.
2. Insert the SD card with the metal contacts
facing the back of the video camera.
3. Push the SD card into the slot until it
clicks into place.
4. Close the SD card and connectors cover.
To remove the SD card
Push the SD card to eject it from the slot.
Warning
- Do not remove the SD card while data is being recorded. Doing so may corrupt
the saved data and damage the card.
- Turn off the video camera before removing the SD card.
Turning On
Press the Menu button to turn on the video camera.
To turn off the video camera
Press and hold the Menu button for 2 seconds.
LED Indicator
Color
Description
Green
Video camera is turned on
Green Blinking - Video recording is in progress
- Self-timer is activated
- Continuous or triple shooting is activated
Red
Battery is charging
The LCD Screen
Capture mode
indicator
Number of captured videos or
photos
Current resolution
Battery status
setting
P1
Need help?
Do you have a question about the Air Cam and is the answer not in the manual?
Questions and answers