Table of Contents
Advertisement
SPEED CONTROL GUIDE
SPEED
1
2 & 3
4 & 5
6 & Pulse
CLEANING & CARE
NOTE: Always turn off and unplug your stand mixer before cleaning.
1.
Before cleaning, allow the stand mixer to cool down for 10 minutes.
2.
Do not let the power cord get wet or immerse the stand mixer or
cord directly in water.
3.
Wipe down the tilt head and base with a soft, damp cloth. Do not use
abrasive materials or commercial household cleaners.
4.
Wipe down the attachment shaft with a damp cloth to remove any
residue that may accumulate. Make sure to dry completely.
5.
Wash the wire whisk, flat beater and dough hook in warm soapy
water. The attachments are not dishwasher safe.
6.
The stainless steel mixing bowl is dishwasher safe.
TO MAINTAIN THE FINISH OF YOUR STAND MIXER AND
PREVENT RUSTING: ALWAYS DRY COMPLETELY BEFORE
STORING IN A COOL, DRY AREA.
CLEANING & CARE
10
8
USED FOR
Slow Mixing
Mixing & Beating
Beating & Creaming
Fast Beating & Whipping
6
TROUBLESHOOTING
Before asking for service, please check for the following:
1.
Check that the big batch mixer is plugged in securely. If it is not,
remove the plug from the outlet, wait 20 seconds, and plug it in
again.
2.
Check for a blown circuit fuse or a tripped circuit breaker. If these
seem to be operating properly, test the outlet with another appliance.
If none of the above rectify the situation, contact:
Customer Service
INSTALLATION & GROUNDING
Ginnys.com • 1.800.544.1590
1.800.544.1590
9
7
Advertisement
Table of Contents
