Do you have a question about the sfa2650 and is the answer not in the manual?
Questions and answers
Summary of Contents for First Alert sfa2650
Page 1
RADIO CONTROLLED WEATHER STATION ALARM CLOCK USER MANUAL SFA2650 PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN IT FOR FUTURE REFERENCE...
IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference.
COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.
LOCATION OF CONTROLS MAIN UNIT Weather Forecast Indicator SNOOZE/LIGHT Button Multi Function Display Mode Button 5. Celsius (°C) / Fahrenheit (°F) selection button Adjust UP/Alarm ON/OFF Button Adjust DOWN/Time Zone Button Maximum/Minimum Temperature/Humidity Record Button Channel Selection Button DC IN Jack Main Unit Battery Compartment Door...
IMPORTANT: Be sure that the batteries are installed correctly. Wrong polarity may damage the unit. NOTE: When you first apply power (AC-DC Adaptor or Batteries) to the SFA2650, the clock display will default to 12 hour mode. The display will show 12:00 AM, and the U.S.
Page 7
map will have the West coast highlighted for Pacific Time zone. If the display is showing something different, or is not in 12 hour mode, please unplug the power adaptor and remove all the batteries from the main unit. Wait a minute or two, and reattach the AC-DC Power Adaptor and replace the Batteries.
Page 8
The antennas are directional and you might be able to improve the signal strength by turning the antenna. Place the SFA2650 along a wall or near a window that faces the source of the broadcast (Fort Collins, Colorado). ...
Page 9
8. The RCC indicator (#4) and RCC receiving indicator (#5) will turn off if you reset the time MANUALLY SETTING THE TIME & CALENDAR If you are out of the broadcast reach of the RCC radio station or if the reception is not strong enough, the time can be set manually.
18. Tap the UP/DOWN button repeatedly to select ON or OFF. Select ON, you will receive day light saving time automatically. Select OFF, you will no receive day line saving time. 19. Press the MODE button to finish the set up. NOTE: 1.) As soon as the RCC signal is received again, the clock will automatically synchronize with received time.
Page 11
INDOOR WEATHER MEASUREMENT (MAIN UNIT) NOTE: 1.) The main unit display backlight will remain when using the AC power adaptor. 2.) When using battery power, the backlight will be off to save battery power. Press the LIGHT/SNOOZE button once, and the backlight will turns on for 10 seconds. Pressing other buttons on the front panel will not turn on the backlight.
Page 12
NOTE: This setting is only applicable to the remote sensor display and will not affect the main unit. 2. Press the channel selection button to set the same channel number with main unit, the channel number (1 - 3) shows in the LCD display. 3.
up and will cycle. The weather indicator lamp lights up from Sunny to Rainy, and will cycle every 5 minutes automatically. CARE AND MAINTENANCE 1. Do not subject the unit to excessive force, shock, dust or extreme temperature. 2. Do not tamper the internal components of the unit. 3.
Page 14
This product is manufactured, distributed or sold by SPECTRA MERCHANDISING INTERNATIONAL, INC., official licensee for this product. All right, title and interest to use the “First Alert” logo trademarks and the “First Alert” trade dress are exclusively licensed by BRK Brands, Inc. and are used under license from BRK Brands, Inc..
Page 15
This warranty is valid only in accordance with the conditions set forth below: 1. The warranty applies to the SPECTRA product only while: a. It remains in the possession of the original purchaser and proof of purchase is demonstrated b. It has not been subjected to accident, misuse, abuse, improper service, usage outside the descriptions and warnings covered within the owner’s manual or non-SPECTRA approved modifications c.
Need help?
Do you have a question about the sfa2650 and is the answer not in the manual?
Questions and answers