Download Print this page

ECOLINE TV7010 Installation Manual

Video surveillance camera

Advertisement

Quick Links

Video surveillance camera
Installation Guide
TV7010
TV7012
TV7011
TV7013
9

Advertisement

loading

Summary of Contents for ECOLINE TV7010

  • Page 1 Video surveillance camera Installation Guide TV7010 TV7011 TV7012 TV7013...
  • Page 2 To maintain this status and to guarantee safe operation, it is your obligation to observe these operating instructions! The ECOLINE mini-dome series of digital cameras is equipped with a 1/3” SONY Super HAD interline transfer CCD image sensor. The all state circuitry provides extremely long life and a high level of reliability.
  • Page 3: Scope Of Delivery

    ECOLINE dome camera (model as described) Installation instructions Fastening screws 3. Features All dome cameras of the ECOLINE series have the following functions: a) Auto electronic shutter (AES) b) Auto gain control (AGC) Additional for colour cameras of this series:...
  • Page 4 Never point the camera towards the sun. Whether the camera is in use or not, never aim the CCD at the sun or other very bright objects (laser light). This can damage the CCD element and create white dots on the monitor, a sign that CCD pixels are destroyed.
  • Page 5: Installation Instructions

    This camera is designed for indoor use only. If the camera is used outdoors, damage may occur as a result of dampness and temperatures outside the prescribed range. The ECOLINE colour cameras are equipped with an IR cut and cannot be used in combination with IR illumination.
  • Page 6 6. Description of the camera 1) Video output (VIDEO OUT) BNC output. This connector is for connecting the camera video signal to the VIDEO IN connector of, for example, the monitor (composite signal: 1Vp-p). 2) Power input 12V DC voltage. Approved for DC voltage are class 2 power supply units only. Ensure the polarity is correct.
  • Page 7: Installation

    (4), modifying the inclination and direction of the camera module, and then tightening the fixing screws again. Fasten the Ecoline mini-dome camera to the desired mounting location using the supplied screws (3) and screw on the plastic housing again.
  • Page 8: Technical Data

    8. Technical data Model number TV7010 TV7011 TV7012 TV7013 Image sensor 1/3” SONY Super HAD CCD TV lines / pixels 420 / 600 / 380 / 470 / 291,000 438,000 291,000 438,000 Minimum 0.1 lux 0.2 lux 0.2 lux 0.4 lux illumination (IRE 30) (F2.0)

This manual is also suitable for:

Tv7011Tv7012Tv7013