Table of Contents
Advertisement
In case of malfunctions,the appliance will display error codes to warn you:
E1
Longer inlet time.
E3
Setting temperatu re not reached.
Overflow.
E4
Communication failure between main PCB
ED
and display PCB
Failure of orientation of distributary valve.
E8
Keep touching a button more
E9
than 30 seconds.
The dishes were not
loaded correctly.
The programme was
not powerful enough.
Not enough detergent
was dispensed.
Items are blocking
the path of sp ay arms.
r
The filter combination
in the base of wash
cabinet is not clean or
is not correctly fitted.
This may cause
the sp ay arm jets
r
to get blocked.
Combination of soft
water and too much
detergent.
Aluminum utensils
have rubbed against
dishes.
Dishes block
detergent cups.
Improper loading
Too little rinse-aid
Dishes are removed
too soon
Wrong program
has been selected
Use of cutlery with
a low-quality coating
If overflow occurs, turn off the main water supply before calling a service.
If the base pan overflows:
- Turn off the main water supply before calling for service
- Remove the excess water before restarting the dishwasher.
See notes in " Loading the Dishwasher Baskets ".
Select a more intensive programme.
See" Wash Cycle Table . "
Use more detergent, or change your detergent.
Rearrange the items so that the sp ay can rotate freely.
Clean and/or fit the filter combination correctly.
Clean the sp ay arm jets. See "Cleaning the Spray
r
Arms".
U se le ss d etergen t if y ou h ave soft wate r and select
a shorter cycle to wash the glassware and to get
th em clean.
Use a mild abrasive cleaner to eliminate those marks.
Re-loading the dishes properly.
Load the dishwasher as suggested in the directions.
Increase the amount of rinse-aid/refill the rinse-aid
dispenser.
D o no t empty your dishwasher immediately after
w ashing. Open the door slightly so that the
steam can escape . Beg in unloading the dish was her
only o nce the dishes are barely warm to the touc h.
Empty the low er baske t first to prevent a ny water
from d ripp ing into the lowe r basket.
With a sho rt program, the washing tempera ture
is lower, d ecre asing cleaning performan ce.
C hoose a program with a long w ashing time.
Water drainage is more difficult with these items.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.
Faucet is not opened, or water intake is
restricted,or water pressure is too low.
Malfunction of heating element.
Some element of dishwasher leaks .
Open circuit or broken communication wire.
Circuit is
open
Water or something on t he button.
26
r
or broken distributary valve.
Advertisement
Table of Contents
