NanoCam Plus NCP-MIR43 User Manual

NanoCam Plus NCP-MIR43 User Manual

Clip on reverse mirror monitor & camera pack

Advertisement

NCP-MIR43
USER MANUAL
CLIP ON REVERSE MIRROR MONITOR
& CAMERA PACK

Advertisement

Table of Contents
loading

Summary of Contents for NanoCam Plus NCP-MIR43

  • Page 1 NCP-MIR43 USER MANUAL CLIP ON REVERSE MIRROR MONITOR & CAMERA PACK...
  • Page 2 Thank you for purchasing NanoCam Plus' 4.3" Reverse Mirror Monitor & Camera Pack. We are certain that our product will give you trouble- free operation while providing you with a safety feature that enhances your driving experience. Our products, like most after-market safety enhanced devices, are designed to assist and aid the driver, not to replace the manual function of the person operating the vehicle.
  • Page 3: Important Notice

    NCP-MIR43 Component List & Package Contents: • Mirror Monitor 4.3" Monitor Camera Power Cable Extension Cable • Camera • 6M AV cable • Power Cable • Camera connection cable Important Notice 1. Please read this manual carefully before using the product.
  • Page 4: Wiring Diagram

    Wiring Diagram Front view option: NCP-MIR43 functions as a rear view camera standard and also supports front view application. For front view application, you can cut the thin WHITE wire near the camera lead and restart power to see the image reversed.
  • Page 5: Installation Diagram

    Installing the Mirror 1. Place the cable over the front of the mirror so that it does not get caught between the mirror monitor and your vehicles rear view mirror during installation. 2. Place the clips on the top of the mirror monitor on the top of your rear view mirror. 3.
  • Page 6: Troubleshooting

    Trouble Shooting Problem Solution 1. Check video input connections “No Signal” appears while reversing 2. Check camera power connections Video image is not sharp Check camera lens for debris Maintenance Always keep camera clear from dirt and mud. Clean camera with a soft moist cloth.
  • Page 7: Warranty Terms And Conditions

    This warranty is provided in addition to your rights under the Australian & New Zealand Consumer Law. NanoCam Plus warrants that this product is free from defects in material and workmanship for a period of 12 months from the date of purchase or for the period stated on the packaging.
  • Page 8 www.nanocamplus.com.au www.nanocamplus.co.nz...

This manual is also suitable for:

Ncp-drm50

Table of Contents