Table of Contents
Advertisement
Contents
Preparation
safety .........................................5
Accessories .................................9
Before use ....................................9
part...........................................11
Getting started
Setting-up...................................16
position, Projection distances,
function
Connections...............................20
compatible with HDMI,
control unit..............................23
Basic operation
Turning on the power................24
Turning off the power................26
Useful functions
Pausing a picture.......................28
Selecting the picture mode.......29
Turning on the button lights.....29
Setting the aspect ratio.............30
settings....................................35
Adjustments and settings
On-screen menus ......................36
Menu screens, Menu operation
guide, Returning a setting to the
Adjusting the picture.................40
BRIGHT, COLOUR, TINT,
SHARPNESS, COLOUR TEMP.,
4-E
NGLISH
DYNAMIC IRIS, ADVANCE MENU,
TV-SYSTEM, SIGNAL MODE,
Adjusting the position...............44
Horizontal position, Vertical position,
DOT CLOCK, CLOCK PHASE,
ASPECT,AUTO SETUP
momentarily (SHUTTER)........45
Option settings ..........................46
OSD, Noise Reduction (NR),
COLOUR, WSS, FRONT/REAR,
DESK/CEILING, FAN CONTROL,
LAMP POWER, LAMP RUNTIME
Care and maintenance
the air filter ..............................50
Replacing the lamp unit ............51
Before calling for service..........54
Cleaning and maintenance .......55
Others
Specifications ............................56
Appendix ....................................58
arrangement of the COLOR
MANAGEMENT menu, Projection
dimensions calculation methods
Dimensions ................................61
Precautions with regard to safety
WARNING
If you notice smoke, strange smells or noise coming from the projector,
disconnect the mains plug from the mains socket.
B Do not continue to use the projector in such cases, otherwise fire or
electric shocks could result.
B Check that no more smoke is coming out, and then contact an Authorised
Service Centre for repairs.
B Do not attempt to repair the projector yourself, as this can be dangerous.
Do not install this projector in a place which is not strong enough to
take the full weight of the projector.
B If the installation location is not strong enough, it may fall down or tip over,
and severe injury or damage could result.
Installation work (such as ceiling suspension) should only be carried
out by a qualified technician.
B If installation is not carried out correctly, there is the danger that injury or
electric shocks may occur.
If foreign objects or water get inside the projector, or if the projector is
dropped or the cabinet is broken, disconnect the mains plug from the
mains socket.
B Continued use of the projector in this condition may result in fire or electric
shocks.
B Contact an Authorised Service Centre for repairs.
Do not overload the mains socket.
B If the power supply is overloaded (for example, by using too many
adapters), overheating may occur and fire may result.
Do not remove the cover or modify it in any way.
B High voltages can cause fire or electric shocks.
B For any inspection, adjustment and repair work, please contact an
Authorised Service Centre.
Clean the mains plug regularly to prevent it from becoming covered in
dust.
B If dust builds up on the mains plug, the resulting humidity can damage the
insulation, which could result in fire. Pull the mains plug out from the mains
socket and wipe it with a dry cloth.
B If not using the projector for an extended period of time, pull the mains
plug out from the mains socket.
E
-5
NGLISH
Hide quick links:
Advertisement
Table of Contents
