Screen Adjustment; Auto Adjustment; Setting Picture Format; Manual Configure - LG 42PM1M Owner's Manual

U514Aen 98/2/18 4:26 AM

Screen Adjustment

Screen Adjustment
Auto
Auto
- RGB (PC) mode only; This function doesn't work for RGB (DTV) mode.
- Automatically adjusts picture position and minimizes image shaking.
- After adjustment, if the image is still not correct, your set is functioning properly but needs further adjustment.
- The Auto config.
1. Press the MENU button and then use
2. Press the button and then use
G G
3. Press the G G button to run Auto configure.
• When Auto config.
• If the position of the image is still not correct, try Auto adjustment again.
4. In RGB (PC) mode, if the image needs to be adjusted more after using
, you can make further adjustments with the
config.

Setting Picture Format

Setting Picture Format
- Caution: If a 4:3 fixed image is on the screen for a long time, it may remain visible.
- Set every aspect ratio for Video, Component 480i sources.
- Use 4:3 or 16:9 for other RGB(PC), HDMI(PC) sources.
- Horizon is not available for RGB (DTV), HDMI (DTV), and Component (DTV) sources.
1. Press the ARC button repeatedly to select the desired picture format. You can also adjust
• 4:3
Choose 4:3
• 16:9
Choose 16:9
•
Horizon
Choose Horizon
a spectacular view.
•
Zoom
- Choose Zoom

Manual Configure

Manual Configure
- If the image still isn't clear after auto adjustment and especially if characters are still jittery, adjust the picture Phase
manually.
- To correct the screen size, adjust
- Phase, Clock, H-position, V-position function works in the following mode : RGB-PC.
- Only H-position, V-position function works in the following mode :RGB-DTV, COMPONENT (480p, 720p,1080i), HDMI-
DTV (480p, 720p,1080i) mode.
1. Press the MENU button and then use
2. Press the button and then use
G G
3. Press the G G button and then use
H-Position or
4. Use the F F / G G
• The Phase
• The
Clock
5. Press the ENTER button to save.
26 Plasma Monitor
Downloaded From TV-Manual.com Manuals
Page 26
Adjustment
Adjustment
and Manual config. are not active in HDMI mode.
D D / E E
button to select
D D / E E
has finished, OK will be seen on the screen.
when you want to view a picture with an original 4:3 aspect ratio, with black bars appearing at both the left and right sides.
when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen.
when you want to adjust the picture in a non-linear proportion, that is, more enlarged at both sides, to create
when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped.
Clock .
D D / E E
button to select
D D / E E
button to to select
D D / E E
V-Position .
button to make appropriate adjustments.
adjustment range is 0 ~ 63.
adjustment range is -20 ~ +50.
button to select the SCREEN menu.
.
Auto config.
Auto
option.
Manual config.
button to select the menu.
SCREEN
.
Manual config.
Phase , Clock ,
SCREEN
SCREEN
G G To set
Auto config.
Manual config.
VGA Mode
ARC
Zoom +/-
Position
Cinema
NR
Reset
MENU Prev.
in the menu.
ARC SCREEN
SCREEN
SCREEN
Auto config.
Phase
Manual config. G G
VGA Mode
Clock
ARC
H-position 0
Zoom +/-
V-position 0
Position
Cinema
NR
Reset
MENU Prev.
0
0