Table of Contents
Summary of Contents for Logic PNM-220
- Page 1 Technical Manual 1.00, PNM-220 Technical Manual for the PNM-220 Version 1.00 Page 1 of 16 Logic IO ApS. Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Email: info@logicio.com Denmark www.logicio.com www.rtcu.dk...
-
Page 2: Introduction
Technical Manual 1.00, PNM-220 Introduction The Logic IO PNM-220 is a complete solution using the Navigation and Messaging Platform designed for the most demanding and professional fleet management applications. The PNM-220 device is a ruggedized 7-inch, easy to read, screen optimized for finger touch usage. -
Page 3: Table Of Contents
Technical Manual 1.00, PNM-220 Table of Contents Introduction..........................2 Table of Contents........................3 Graphical view........................4 Package overview........................5 PNM-220 Overview......................6 Typical System Connection....................8 Typical Application.........................9 Interfacing to the RTCU MX2i Pro/Pro+................9 Analog camera interface....................10 Interfacing to the RTCU IDE Simulator................11 Technical Specifications......................12 Appendix A – Mounting the dashboard bracket..............13 Appendix B –... -
Page 4: Graphical View
Technical Manual 1.00, PNM-220 Graphical view Page 4 of 16 Logic IO ApS. Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Email: info@logicio.com Denmark www.logicio.com www.rtcu.dk... -
Page 5: Package Overview
Technical Manual 1.00, PNM-220 Package overview The PNM-220 package includes the following items: Quantity Item Description PNM-220 device Windows CE6.0 device. Mounting Bracket PNM-220 device mounting bracket 8 GB SD-CARD With pre-installed software. Typically already installed in the PNM-220 device. -
Page 6: Pnm-220 Overview
To interact with the application using finger touch or attached stylus Please note that all the keys and the status LEDs on the PNM-220 device can be configured by the VPL application. Please refer to the RTCU IDE online-help for further information. - Page 7 Cover located. The PNM-220 device can be reset asynchronously using the reset button, located at the backside of the device. Please do not use the button unless it is absolutely needed. The stylus can be used for more accurate handling of the touch screen. As the touch screen is resistive, a finger can be used as well.
-
Page 8: Typical System Connection
Technical Manual 1.00, PNM-220 Typical System Connection A typical system installation is illustrated below: RTCU Unit External Power Supply The application in the RTCU unit controls the power to the PNM device. Unlike the other PNM devices with external interface box, this device will only shut down directly while it is communicating with the RTCU. -
Page 9: Typical Application
Technical Manual 1.00, PNM-220 Typical Application This is a quick start guide to connect the PNM device to the supported RTCU units. It is easy to install the PNM system on location with the supplied cable for the RTCU MX2i pro/pro+. -
Page 10: Analog Camera Interface
Technical Manual 1.00, PNM-220 Analog camera interface PNM-220 offers connection for up to two analog cameras using the BNC connectors available at the PNM device interface cable. Analog camera #1 must be connected to the cable labeled with BNC-1 and analog camera #2 must be connected to BNC-2. -
Page 11: Interfacing To The Rtcu Ide Simulator
Technical Manual 1.00, PNM-220 Interfacing to the RTCU IDE Simulator The PNM-220 is supported by the RTCU IDE Simulator. In order to connect the PNM-220 series device to the PC, an optional cable with the order code RT-PNM-PC is needed. -
Page 12: Technical Specifications
Technical Manual 1.00, PNM-220 Technical Specifications Page 12 of 16 Logic IO ApS. Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Email: info@logicio.com Denmark www.logicio.com www.rtcu.dk... -
Page 13: Appendix A - Mounting The Dashboard Bracket
Technical Manual 1.00, PNM-220 Appendix A – Mounting the dashboard bracket A dashboard mounting bracket is included for easy installation of the PNM-220 device. In the following the mounting of the bracket will be described. Adjustment screw handle Bracket 1. Loosen the adjustment screw handle, and set the bracket arm to an upraised position 2. -
Page 14: Logic Io Aps Holmboes Allé
Technical Manual 1.00, PNM-220 Mounting jack Mounting jack starting point Securing screw 4. The vertical angle and rotation of the PNM device can be adjusted using the screw handle on the bracket. 5. Remove the protection paper of the adhesive and place the bracket on a proper location at the dashboard. -
Page 15: Appendix B - Installation And Removal Of The Sd Card
Technical Manual 1.00, PNM-220 Appendix B – Installation and removal of the SD card The SD card reader is hidden in a compartment for protection purpose. Access the compartment with the SD-CARD reader as follows: 1. Unscrew the two M2 screw from the compartment cover. - Page 16 Technical Manual 1.00, PNM-220 A side view of the terminal when the cover is removed is as follows: SD card slot Mini USB port USB port Earphone jack Interface Description Mini USB Port Mini USB 2.0 service port. USB Port USB host port.