Do you have a question about the Wireless Surveillance Camera System and is the answer not in the manual?
Questions and answers
Cardis Yerger
April 9, 2025
My image is inverted. The image is upside down.
1 comments:
Mr. Anderson
April 9, 2025
To fix the inverted image issue on the xmartO Wireless Surveillance Camera System, follow these steps:
1. Access the Camera Settings: - Use the NVR (Network Video Recorder) interface or the xmartO mobile app. - Log in with your administrator credentials.
2. Navigate to the Camera Configuration: - On the NVR: Right-click the screen, go to the camera settings or channel settings. - On the app: Select the camera, then go to its settings menu.
3. Find the Image Adjustment Option: - Look for settings like “Image,” “Display,” “Video,” or “Picture.” - Locate the option for “Flip,” “Rotate,” or “Mirror.”
4. Correct the Orientation: - If the image is upside down, enable the "Flip" or "Vertical Flip" option. - If the image is mirrored, enable or disable the "Mirror" or "Horizontal Flip" option as needed.
5. Save the Settings: - Apply or save the changes. - The image should now display correctly.
6. Restart the Camera (if needed): - If the change does not apply immediately, restart the camera or NVR system.
Note: The exact menu names may vary slightly depending on the model.
Need help?
Do you have a question about the Wireless Surveillance Camera System and is the answer not in the manual?
Questions and answers
My image is inverted. The image is upside down.
To fix the inverted image issue on the xmartO Wireless Surveillance Camera System, follow these steps:
1. Access the Camera Settings:
- Use the NVR (Network Video Recorder) interface or the xmartO mobile app.
- Log in with your administrator credentials.
2. Navigate to the Camera Configuration:
- On the NVR: Right-click the screen, go to the camera settings or channel settings.
- On the app: Select the camera, then go to its settings menu.
3. Find the Image Adjustment Option:
- Look for settings like “Image,” “Display,” “Video,” or “Picture.”
- Locate the option for “Flip,” “Rotate,” or “Mirror.”
4. Correct the Orientation:
- If the image is upside down, enable the "Flip" or "Vertical Flip" option.
- If the image is mirrored, enable or disable the "Mirror" or "Horizontal Flip" option as needed.
5. Save the Settings:
- Apply or save the changes.
- The image should now display correctly.
6. Restart the Camera (if needed):
- If the change does not apply immediately, restart the camera or NVR system.
Note: The exact menu names may vary slightly depending on the model.
This answer is automatically generated