Samsung GT-P5100 User Manual page 99

›
Connect to a Wi-Fi AP with a protected setup
You can connect to a secured AP with a WPS button or WPS
PIN. To use this method, your wireless access point must have
a WPS button.
Connect with a WPS button
1
In the application list, select
2
Select
3
Press the WPS button on the AP within 2 minutes.
Connect with a WPS PIN
1
In the application list, select
2
Select
3
On the AP, enter the PIN of your device.
›
Set the static IP settings
1
In the application list, select
2
Select an AP
3
Select the
4
Static.
Select
5
Change the IP settings.
6
Connect.
Select
→ WPS push button.
→ WPS PIN entry.
→ Show advanced options.
IP settings drop-down menu.
Settings
Settings
Settings
Connectivity
99
→ Wi-Fi.
→ Wi-Fi.
Wi-Fi.
→