1. Manuals
  2. Brands
  3. AirRaid Audio Manuals
  4. Cables and connectors
  5. Elements Splitter
  6. Operation manual

AirRaid Audio Elements Splitter Operation Manual

Hide thumbs
1
2
3
4
5

Advertisement

Table of Contents

[ OPERATION MANUAL ]


Updated: 15/07/15

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Elements Splitter and is the answer not in the manual?

Questions and answers

Summary of Contents for AirRaid Audio Elements Splitter

  • Page 1 [ OPERATION MANUAL ] 
 Updated: 15/07/15...
  • Page 2 Elements: Splitter Welcome! Thank you for purchasing Elements: Splitter. Featuring the sum-to-zero crossovers and mid/side features from our popular multiband series, Splitter is a one-of-a-kind band-splitter, band-combiner and multiband stereo utility. Used either as a standalone device or as part of a modular/multiband setup, Splitter is an exceptional creative tool for sound designers and musicians alike.
  • Page 3 Elements: Splitter Contents Welcome! Loading and saving patches Controls and displays X-Overs Bands Rear Panel Loading and saving patches Loading and saving patches in Splitter is done in the same way as with any other Reason device. See “Loading patches” and “Saving patches” in the Reason Operation Manual for further information.
  • Page 4 Elements: Splitter BANDS On — Toggles the band on or off. This only applies to the Low and High bands, as the Mid band is always active. If either the High or Low bands are turned off, then Splitter functions as a dual-band effect.
  • Page 5 Elements: Splitter The Lo/Mid and Mid/High X-Overs, and the Mid/Side, Pan and Volume parameters for each of the three bands. Audio I/O — The routing in Splitter works in one of two different ways: ‣ Pre-split mode (active if only the Main L/R audio inputs are connected): A conventional band splitter ( X-Over ->...

Table of Contents