Table of Contents
Advertisement
Changing the Oil and Filter
Always change the oil and filter
according to the time and distance
(miles/kilometers) recommenda-
tions in the maintenance schedule.
The oil and filter collect contami-
nants that can damage your engine if
they are not removed regularly.
Changing the oil and filter requires
special tools and access from
underneath the car. The car should
be raised on a service station-type
hydraulic lift for this service. Unless
you have the knowledge and proper
equipment, you should have this
maintenance done by a skilled
mechanic.
1.
Run the engine until it reaches
normal operating temperature,
then shut it off.
2.
Open the hood and remove the
engine oil fill cap.
HOLDING CLIP
3.
Remove the nine holding clips
with a flat-tipped screwdriver, then
pull the cover down.
Engine Oil
DRAIN BOLT
WASHER
4.
Remove the oil drain bolt and
washer from the bottom of the
engine. Drain the oil into an
appropriate container.
Maintenance
CONTINUED
197
Hide quick links:
Advertisement
Table of Contents
