Honda 2003 S2000 Owner's Manual page 160

Hide thumbs Also See for 2003 S2000:
Table of Contents

Advertisement

Changing the Oil and Filter
Always change the oil and filter
according to the time and distance
(miles/kilometers) recommenda-
tions in the maintenance schedule.
The oil and filter collect contami-
nants that can damage your engine if
they are not removed regularly.
Changing the oil and filter requires
special tools and access from
underneath the car. The car should
be raised on a service station-type
hydraulic lift for this service. Unless
you have the knowledge and proper
equipment, you should have this
maintenance done by a skilled
mechanic.
1.
Run the engine until it reaches
normal operating temperature,
then shut it off.
WASHER
OIL DRAIN BOLT
2.
Remove the engine oil fill cap.
Remove the oil drain bolt from the
bottom of the engine. Drain the oil
into an appropriate container.
Engine Oil
OIL FILTER
3.
Remove the oil filter and let the
remaining oil drain. A special
wrench (available from your
Honda dealer) is required to
remove the filter.
4.
Install a new oil filter according to
instructions that come with it.
Maintenance
CONTINUED
163

Advertisement

Table of Contents
loading

Table of Contents