Honda 2003 Civic Si Owner's Manual page 204

2. Turn the socket one-quarter turn
counterclockwise to remove it
from the lens.
3. Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
4. Put the socket back into its hole in
the lens and turn it clockwise until
it locks.
5. Test the lights to make sure the
new bulb is working.
6. Place the tabbed end of the side
marker assembly into the bumper
first, then the looped end. Press on
the looped end to get the assembly
to snap back in place.
Replacing a Front Parking Light
Bulb
BULB
1. Open the hood. The front parking
light is next to the headlight bulb.
2. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
3. Pull the bulb straight out of its
socket.
Push the new bulb straight into
SOCKET the socket until it bottoms.
4. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
5. Turn on the parking lights and
check that the new bulb is
working.
Lights
205
Maintenance